My Autos

The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com

How To Get An Extra $1500 For Your Trade In
How To Get An Extra $1500 For Your Trade In If your’re trading in a car to a dealer follow these steps and get an extra $500 to $1500 for it! Get the wholesale price for the car your’re trading in. This allows you to have a starting figure and know what the dealer thinks your vehicle is worth. Now you’ll know what you can expect to get from your car, but the dealer won?t make it easy. Remember, they’re trying to make a profit, and giving you as little as possible for your trade-in is another way they can make money. They’ll try to bargain down the price they’ll give you for your car by saying: There are huge rebates on the new ones which affects the secondary market. “That’s a nice car, but we have 6 just like it already on the lot.? Oh, that’s an old body style, they’re impossible to sell anymore. Wow, this one’s been through the wringer there sure are a lot of dings and scratches.” Hmmm…it has a lot of miles on it, well have to take it to the auction. Of course, some of these statements might be true, but the dealer is also likely to exaggerate so they can under-value your car. How can you fight back? Here are a few tips: Have your vehicle professionally detailed. Bring all your service records to show the car was properly maintained. Make sure everything works: air, radio, etc. Put a few new car brochures (from other manufacturers) are in your car, plainly visible, so the salesperson knows your’re shopping. If you you follow these simple steps you will guarantee to get more for your trade-in! [ Submitted with ArticleSubmitter Pro - http://www.articlesubmitterpro.com] Gus Skarlis is a former car dealer and founder of Before You Buy A Car. His Book "10 Things You Must Do Before You Even Think About Buying A Vehicle" has helped thousands of consumers save money and time when purchasing a vehicle. This FREE resource takes you step by step through the car buying process. The site is located at: http://www.BeforeYouBuyACar.com
Source: www.ArticlePros.com